Simpson Strong Tie SET-XP650-AU High Strength Epoxy Anchoring Adhesive 650ml


SET-XP650-AU Epoxy Anchoring Adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system (dual cartridge) with the resin and hardener simultaneously dispensed and mixed through the mixing nozzle. When mixed properly, adhesive will be a teal colour for easy post-installation identification.


  • Seismic Rated as per ACI 355.4
  • High Strength
  • Non-shrink, high solids
  • Long-term loading (creep) applications
  • Non-sag formulation: good for vertical applications
  • Suitable for oversized and core-drilled holes
  • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
  • Cure times: 24 hours at 21°C, 72 hours at 10°C
  • Easy hole-cleaning — no power-brushing required
  • Suitable for use in dry or water-saturated concrete
  • For best results, store between 7°C and 32°C
  • Applications
  • Rebar Dowelling
  • Tension Zones
  • Dry and Wet Concrete
  • Threaded Rod Anchoring
  • General Purpose Anchoring
  • Overhead Anchoring (Tension Zones)
  • Structural Steel
  • Seismic Retrofit


  • Complies with AS5216
  • Seismic testing per ACI 355.4
  • ETA-11/ 0360 (OPTION 1)
  • ICC-ES ESR-2508 (Concrete)
  • IAPMO UES ER-265 (Masonry)
  • NSF/ANSI Standard 61 (313 cm2/ 1000 L)
  • Transport and Main Roads (QLD) product approval (Threaded rod and Reinforcing bar)



Code: SET-XP650-AU

Brand: Simpson Strong Tie

Category: Glues

Size: 650ml

Box Qty: 10





Brand Simpson Strong Tie

Be The First To Review This Product!

Help other GFC fasteners and construction products users shop smarter by writing reviews for products you have purchased.

Write a product review