Tech Pac Hi-Viz


If you’re any kind of technician, you’re going to love the layout of this Tech Pac Hi-Viz backpack tool bag. Designed specifically for professional tradesmen who need to climb ladders or walk long distances on a daily basis.

Veto Pro Pac’s Award Winning Tech Pac Backpack Tool Bag just got better!

Veto’s Tech Pac backpack tool bag is designed specifically for professional tradesmen who need to climb ladders or walk long distances on a daily basis. Our Hi-Viz version features high visibility and water-repellent fabric, YKK locking zippers, a magnetic screw catcher, metal shoulder strap sliding buckles, redesigned front top pockets for better storage and a redesigned stainless steel tape clip holder.

The Tech Pac Hi-Viz features Veto Pro Pac’s patented centre panel, heavy duty construction and stabilising injection moulded waterproof base that keeps tools dry, even in the nastiest of conditions. This backpack is also made for comfort with a thermo-formed EVA padded back panel that helps cushion the load (which also provides structural stability), a padded load displacing shoulder strap system with multiple adjustment strap points and an ergonomic TPV rubber grip.



  • Width: 251mm
  • Length: 362mm
  • Height: 547mm (461mm with handle folded down)
  • Weight: 4.1kg (empty)



  • Vertical Tool Pockets: 56 interior and exterior tool pockets of various sizes
  • 2 Storage Bays- 4 Storage Platforms
  • Manifold Gauge and Hose Storage Pocket
  • D-Rings: 4 large and 5 small
  • Outside Mounted Stainless Steel Tape Clip Holder
  • Cable and Accessory Pockets



  • LOAD TESTED: PULLED TO DESTRUCTION AT 376.5kg (Handle failed); Hook failed at 90.7kg
  • Weatherproof Base: 3mm Injection Moulded Polypropylene
  • Weatherproof Body Fabric: 950 and 1250 PVC Impregnated Denier Nylon
  • Weatherproof LIGHT GRAY Tool Pocket Fabric: 1800 PVC Impregnated Denier Nylon- LIGHT GRAY FOR BETTER VISIBILIT
  • Quick Release Metal Hasp: Allows Easy Access to Rear Storage Bay
  • Strap Load Connection
  • Internally Stored Aluminium Hook to Hang Bag
  • Over-Moulded Ergonomic Grip
  • Padded EVA Thermoformed, Ergonomic Back Padding
  • Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
  • Metal Shoulder Strap Sliding Buckles
  • D-Rings: Powder Coated Steel
  • Rivets: Marine Grade Rivets
  • Stitching: Industrial Strength Double Nylon Stitching


OTHER FEATURES            

  • Adjustable Padded Shoulder Straps
  • YKK Locking Zippers
  • Magnetic Screw Catcher
  • Tablet/All-Purpose Zippered Pocket



Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.



Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.



Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed…proceed with caution!


Brand Veto Pro Pac

Be The First To Review This Product!

Help other GFC fasteners and construction products users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Related Products