Cemix Pavseal 20ltr

DESCRIPTION:

CEMIX® PAVING SEALER is a stain resistant water based penetrating and film forming clear weatherproofing sealer. It is based on silane modified nano particle size, self-cross linking hybrid technology and can be effectively used for impregnating and sealing a variety of pavers.

It provides adhesion, penetrating and sealing properties on various substrates because of the nano dense self-cross linking particles. There is little or no impairment of the paver’s ability to breathe and exhibits a good MVTR (moisture vapour transmission rate). It can be successfully applied on slightly damp pavers, but surface dry pavers.

The application does not produce any discolouration of the surface and is suitable for weatherproofing and sealing a wide variety of absorbent surfaces and not suitable for very dense substrates like marble and granite.

It can also be used on timber decks, outdoor furniture, timber wall cladding, clay roof tiles, fibre reinforced cement sheets etc.

ADVANTAGES:

• Environmentally friendly green product

• Hybrid sealer – penetrates as well as coats (thin film).

• Exhibits a high degree of stain resistance

• Chemically resistant and non toxic

• UV stable – will not go yellow over time

SURFACE PREPARATION:

Ideally this sealer should be applied on new freshly laid pavers. The paver surfaces should be water blasted and made clean, free from grease, loose particles, dirt, paint, curing compounds etc. Moss or algae growth should be removed with a suitable treatment and washed with clean water.

CODE: WDR21106